Netex+ TDM Based SHDSL.bis Modem

Netex+ TDM Based SHDSL.bis Modem

P/N: itt-tm660
Category: Modems,

Netex+ TDM Based SHDSL.bis Modem product family offers a broad range of products, which are based on the latest SHDSL.bis standards (ITU-T G.991.2 & ETS TS 101524), while also being fully interoperable with all our existing SHDSL equipment .The Netex + Mini supports beside of the standardized TC-PAM16/32 also the new extended TC-PAM4/8/64/128 line coding. SHDSL.bis allows symmetrical data and voice transmission at speeds up to 15Mbps over a single pair of copper. In addition, the Netex + Mini SHDSL.bis modem range also supports DSL channel bonding for up to 2 copper pairs in order to achieve speeds up to 30.4Mbps. An integrated 2 port Ethernet layer 2 managed switch with VLAN, QoS and RSTP support (10/100BaseT) ensures connectivity to IP services. The Netex + Mini SHDSL.bis modems is a perfect solution for a wide range of applications in which IP services need to be transmitted over copper wires. The Mini SHDSL.bis product is a small-sized NTU unit with all the functionality included. Like all Netex + products the Netex + Mini SHDSL.bis modems are based on industrial components and manufactured according to highest quality standards providing additional value due to the extended temperature ranges and higher reliability. The combination of comprehensive functions providing maximum flexibility together with the higher quality of the Netex + Mini SHDSL.bis product family make it the perfect choice for all your DSL needs.

EFM Modem

Select Bitrate using rotary switch

Select Mode using DIP switch

Connect SHDSL line to SHDSL plug

Connect Ethernet using Ethernet plug

Connect Micro USB port for power


Select Bitrate using rotary switch

Select Mode using DIP switch

Connect SHDSL line via the SHDSL pin header

Connect Ethernet via the Ethernet pin header

Connect +5.0VDC power via the power pin header

Plug and Play Ethernet Extender

Select Bitrate using rotary switch

Using the DIP switch, set one board to STU-C (master) and the other to STU-R (slave)

Connect SHDSL ports together with twisted pair

Connect Ethernet ports

Power up and the connection will establish after a few seconds

Copper Pairs4 with Modes Master / Slave / Auto / Multipoint / Multipair
Interface2x E1 (120Ohm), 2x Ethernet 10/100BaseT (Layer 2 Managed Switch)
Power36 to 230VDC, accepts local and remote power, 5.3W Typ. 18 to 230VDC, no remote power when FG-PAM-SA4N2E1B/2Eth-24V,V84E
Physical InterfacesRJ48 (E1), RJ45 (Ethernet), RJ48 (SHDSL), Molex (Power), DB9/USB (LCT)
ManagementConsole Port, Telnet, HTTP and SNMP
TemperatureStandard: -5 to +45ºC, Extended: -20 to +80ºC
Power Supply

12/24/48 VDC

< 0.5A @24VDC


Features & Benefits
SOCRATES-e Transceiver
Selectable bitrate (including auto mode)
Use as EFM Modem, SHDSL-EFM-Module or Plug & Play Ethernet Extender
USB EIA232 emulation or TTL compatible EIA232 interface
On Board software
Low Cost Fixed Interfaces
Din-rail or Standalone Solutions
Smallest Size
Extended Temperature option (-40°C... +80°C)
Steel case


Don`t Forget to Leave Your Comments:


  • JamOriewly|Date:2020-02-11|

    Viagra Plus Online - order cialis online Glyburide Online No Prescription Cialis Doxycycline Epocrates Online